Investigations of the mechanism of tuyere destruction during top blowing of matte
Abstract
One of the most important structural elements of the unit for continuous conversion of matte by the method of the LGI – Gipronickel is the unit of blast supply to the melt. In industrial continuous conversion units, the critical periods of tuyere operation must be reduced to a minimum through stable operation of the unit, relatively small fluctuations in the bath level, maintenance of the optimal distance between the tuyere and the melt, and the optimal thickness of the slag layer on the bath. This will help significantly extend the service life of industrial tuyeres.
Область исследования:
(Archived) Without section
Funding:
None
References
- Galnbek A.A., Shmonin Yu.B. - Tsvetnaya metallurgiya. Izv. vuzov, 1969, no. 1, pp. 19-23. (in Russian)
- Galnbek A.A., Shmonin Yu.B., Lepikhin B.V. - Tsvetnaya metallurgiya. Byull. TsNIITsM, 1974, no. 21, pp. 31-34. (in Russian)
- Diomidovsky D.A., Shalygin L.M., Galnbek A.A. - Tsvetnye Metally, 1959, no. 2, pp. 27-33. (in Russian)
- Shalygin L.M. Converter processing in non-ferrous metallurgy. M., Metallurgiya, 1965. (in Russian)
Similar articles
Sampling of flux-free copper-nickel matte products at a pilot continuous conversion unit
1978 Yu. B. Shmonin, A. A. Galnbek
The extraction of the sulfide phase from converter slags
1978 A. T. Bosonogov, M. I. Popov, I. N. Piskunov, F. T. Bumazhnov, A. S. Kurnygin
A mathematical model for controlling the calcination process in alumina production
1978 V. A. Terentyev, O. N. Tikhonov, V. D. Ryvkin