Submit an Article
Become a reviewer
V. I. Vdovichenko
V. I. Vdovichenko

Articles

Without section
  • Date submitted
    1974-07-20
  • Date accepted
    1974-09-28
  • Date published
    1975-01-01

Guiding surfaces of the mechanism of axial-type rotary machines

Article preview

The principle of operation of the mechanism of rotary machines of axial type has been considered in detail earlier. A characteristic feature of these machines is the forced movement of plates (blades) along the axis of rotation of the rotor, realized through their interaction with special guiding surfaces, the type of which completely determines the working properties of the machine. ...

How to cite: Vdovichenko V.I. Guiding surfaces of the mechanism of axial-type rotary machines // Journal of Mining Institute. 1975. Vol. 69 № 1. p. 114-118.
Without section
  • Date submitted
    1974-07-10
  • Date accepted
    1974-09-05
  • Date published
    1975-01-01

Correction of guiding surfaces of the mechanism of axial-type rotary machines

Article preview

One of the essential advantages of the mechanism of axial rotating machines is the possibility of realization of geometric closure of kinematic pairs formed by plates with guiding surfaces. However, accurate geometric closure requires consideration of some design and technological factors, which in the case of force closure can be chosen arbitrarily. ...

How to cite: Vdovichenko V.I. Correction of guiding surfaces of the mechanism of axial-type rotary machines // Journal of Mining Institute. 1975. Vol. 69 № 1. p. 119-122.
Without section
  • Date submitted
    1969-09-08
  • Date accepted
    1969-11-09
  • Date published
    1970-10-23

Область рационального применения тяговых устройств на уклонах

Article preview

Тяговые устройства с автоматическим регулированием при­жатия колес к рельсу обеспечивают заданный режим сцепле­ния гладких колес с рельсами независимо от профиля пути и изменения внешней нагрузки, что позволяет использовать их для перемещения грузов в наклонных горных выработках с лю­быми углами наклона ...

How to cite: Vdovichenko V.I. // Journal of Mining Institute. 1970. Vol. 60 № 1. p. 53.
Without section
  • Date submitted
    1969-09-26
  • Date accepted
    1969-11-09
  • Date published
    1970-10-23

Статические характеристики рычажных звеньев тяговых устройств

Article preview

Тяговые устройства с автоматическим регулированием силы: прижатия тяговых колес к рельсу в зависимости от сопротив­ления движению рассмотрены в работах В. С. Берсенева ...

How to cite: Vdovichenko V.I. // Journal of Mining Institute. 1970. Vol. 60 № 1. p. 58.
Without section
  • Date submitted
    1969-09-15
  • Date accepted
    1969-11-17
  • Date published
    1970-10-23

Картина вариаций кривошипно-шатунного механизма и ее приложения

Article preview

Кривошипно-шатунный механизм в общем виде однозначно определяется тремя независимыми параметрами, например, следующими ...

How to cite: Vdovichenko V.I. // Journal of Mining Institute. 1970. Vol. 60 № 1. p. 63.
Information on research works of the department of construction of mining machines
  • Date submitted
    1969-09-18
  • Date accepted
    1969-11-17
  • Date published
    1970-10-23

Четырехколесные тяговые устройства

Article preview

Созданные в ЛГИ тяговые устройства имеют одно или два гладки к приводных колеса. Число их по условиям прочности определяет возмож­ную силу тяги при заданных габаритах тягового устройства.

How to cite: Vdovichenko V.I. // Journal of Mining Institute. 1970. Vol. 60 № 1. p. 203.