<?xml version="1.0" encoding="UTF-8"?>
<article xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:mml="http://www.w3.org/1998/Math/MathML" dtd-version="1.4" article-type="research-article">
  <front>
    <journal-meta>
      <journal-id journal-id-type="issn">2411-3336</journal-id>
      <journal-id journal-id-type="eissn">2541-9404</journal-id>
      <journal-title-group>
        <journal-title xml:lang="ru">Записки Горного института</journal-title>
        <journal-title xml:lang="en">Journal of Mining Institute</journal-title>
      </journal-title-group>
      <publisher>
        <publisher-name xml:lang="ru">Санкт-Петербургский горный университет императрицы Екатерины ΙΙ</publisher-name>
        <publisher-name xml:lang="en">Empress Catherine II Saint Petersburg Mining University</publisher-name>
      </publisher>
    </journal-meta>
    <article-meta>
      <article-id custom-type="pmi" pub-id-type="custom">pmi-12792</article-id>
      <article-id pub-id-type="uri">https://pmi.spmi.ru/pmi/article/view/12792</article-id>
      <article-categories>
        <subj-group subj-group-type="section-heading" xml:lang="ru">
          <subject>Горное дело</subject>
        </subj-group>
        <subj-group subj-group-type="section-heading" xml:lang="en">
          <subject>Mining</subject>
        </subj-group>
      </article-categories>
      <title-group>
        <article-title xml:lang="en">Study of the mode of ore drawing under backfill ( using models)</article-title>
        <trans-title-group xml:lang="ru">
          <trans-title>Исследование режима выпуска руды под закладкой (на моделях)</trans-title>
        </trans-title-group>
      </title-group>
      <contrib-group>
        <contrib contrib-type="author" corresp="yes">
          <name name-style="eastern">
            <surname>Panenkov</surname>
            <given-names>Yu. I.</given-names>
          </name>
          <name-alternatives>
            <name name-style="eastern" xml:lang="ru">
              <surname>Паненков</surname>
              <given-names>Ю. И.</given-names>
            </name>
            <name name-style="western" xml:lang="en">
              <surname>Panenkov</surname>
              <given-names>Yu. I.</given-names>
            </name>
          </name-alternatives>
          <email>pmi@spmi.ru</email>
          <xref ref-type="aff" rid="aff1"/>
        </contrib>
        <aff-alternatives id="aff1">
          <aff>
            <institution xml:lang="ru"/>
          </aff>
          <aff>
            <institution xml:lang="en"/>
          </aff>
        </aff-alternatives>
      </contrib-group>
      <pub-date pub-type="epub" iso-8601-date="1960-12-16">
        <day>16</day>
        <month>12</month>
        <year>1960</year>
      </pub-date>
      <pub-date date-type="collection">
        <year>1961</year>
      </pub-date>
      <volume>44</volume>
      <issue>1</issue>
      <fpage>71</fpage>
      <lpage>77</lpage>
      <history>
        <date date-type="received" iso-8601-date="1960-07-29">
          <day>29</day>
          <month>07</month>
          <year>1960</year>
        </date>
        <date date-type="accepted" iso-8601-date="1960-09-27">
          <day>27</day>
          <month>09</month>
          <year>1960</year>
        </date>
        <date date-type="rev-recd" iso-8601-date="1960-12-16">
          <day>16</day>
          <month>12</month>
          <year>1960</year>
        </date>
      </history>
      <permissions>
        <copyright-statement xml:lang="ru">© 1960 Ю. И. Паненков</copyright-statement>
        <copyright-statement xml:lang="en">© 1960 Yu. I. Panenkov</copyright-statement>
        <copyright-year>1960</copyright-year>
        <copyright-holder xml:lang="ru">Ю. И. Паненков</copyright-holder>
        <copyright-holder xml:lang="en">Yu. I. Panenkov</copyright-holder>
        <license license-type="open-access" xlink:href="http://creativecommons.org/licenses/by/4.0" xml:lang="ru">
          <license-p>Эта статья доступна по лицензии Creative Commons Attribution 4.0 International (CC BY 4.0)</license-p>
        </license>
        <license license-type="open-access" xlink:href="http://creativecommons.org/licenses/by/4.0" xml:lang="en">
          <license-p>This article is licensed under a Creative Commons Attribution 4.0 International License (CC BY 4.0)</license-p>
        </license>
      </permissions>
      <self-uri xlink:type="simple" xlink:href="https://pmi.spmi.ru/pmi/article/view/12792">https://pmi.spmi.ru/pmi/article/view/12792</self-uri>
      <abstract xml:lang="ru">
        <p>В практике горнорудной промышленности встречаются случаи, когда выпуск магазинированной руды из камер приходится вести под заклад­кой, опускающейся вслед за рудой и непрерывно добавляемой по мере выпуска руды. Необходимость в этом может встретиться при недоста­точно устойчивых породах висячего бока или междукамерных целиков руды. При этом закладка лежит непосредственно на руде или приме­няется разделяющее руду и закладку перекрытие с целью предотвраще­ния разубоживания руды закладочным материалом. Однако такую роль перекрытие может выполнять не всегда. Например, при недостаточно крутом угле падения и большой высоте этажа оно рано опускается на лежачий бок, и значительное количество руды после этого будет выпу­скаться практически без перекрытия. Опускающееся на лежачий бок совместно с лежащей на нем закладкой перекрытие также может зажать часть руды, которая в таком случае будет потеряна. Это объясняется стремлением кусков руды, закладки и самого перекрытия под действием силы тяжести перемещаться вертикально вниз.</p>
      </abstract>
      <abstract xml:lang="en">
        <p>In the practice of the mining industry, there are cases when the release of stored ore from the chambers has to be carried out under a rock fill, which is lowered after the ore and is continuously added as the ore is released. The need for this may be encountered when the rocks of the hanging wall or the inter‑chamber ore pillars are not stable enough. In this case, the backfill lies directly on top of the ore or a covering is used to separate the ore and the backfill to prevent dilution of the ore by backfill material. However, the covering may not always fulfill this role. For example, if the dip angle is not steep enough and the level height is large, it will drop onto the footwall early, and a significant amount of ore will then be released virtually uncovered. The covering falling on the footwall, together with the backfill lying on it, may also clamp some of the ore, which will then be lost. This is due to the tendency of the ore pieces, the backfill and the covering itself to move vertically downwards under the influence of gravity.</p>
      </abstract>
    </article-meta>
  </front>
  <body/>
  <back>
    <ref-list>
      <ref id="ref1">
        <label>1</label>
        <mixed-citation xml:lang="ru">Малахов Г М. ВЫПУСК руды из обрушенных блоков. Металлургиздат, 1952.</mixed-citation>
        <mixed-citation xml:lang="en">Malakhov G. M. Ore drawing from caved blocks. Metallurgizdat, 1952. (in Russian)</mixed-citation>
      </ref>
      <ref id="ref2">
        <label>2</label>
        <mixed-citation xml:lang="ru">Галаев Н. 3. Исследование условий, определяющих основные размеры выпуска руды. Рукопись. Канд. диссертация. Фонды ЛГИ, 1953.</mixed-citation>
        <mixed-citation xml:lang="en">Galaev N. Z. Study of conditions determining the main dimensions of ore release. Manuscript. Candidate's thesis. Fondy LGI, 1953. (in Russian)</mixed-citation>
      </ref>
      <ref id="ref3">
        <label>3</label>
        <mixed-citation xml:lang="ru">Цитович Н. А. Механика грунтов. Госстройиздат, 1947.</mixed-citation>
        <mixed-citation xml:lang="en">Tsitovich N. A. Soil mechanics. Gosstroyizdat, 1947. (in Russian)</mixed-citation>
      </ref>
    </ref-list>
  </back>
</article>
