Submit an Article
Become a reviewer

About resistant steel 110G13L in different abrasive media

Authors:
V. I. Bolobov1
A. P. Batalov2
V. S. Bochkov3
S. A. Chupin4
  • 1 — National Mineral Resources University (Mining University)
  • 2 — National Mineral Resources University (Mining University)
  • 3 — National Mineral Resources University (Mining University)
  • 4 — National Mineral Resources University (Mining University)
Date submitted:
2016-10-14
Date published:
2014-03-01

Abstract

Regularities abrasion steel 110G13L with a significant load on the sample and impact. Found that increasing the load to the point where the voltage on the surface of the sample achieved a true rupture stress of the material, does not increase the wear resistance of steel. Shown that the impact and, therefore, have no hardening significant influence on the wear rate of steel in its work on the solids (granite, gabbro). In the case of soft rocks (marble) concomitant impact effect is exceeds durability of the material. Designed conclusion on whether the elements are made of mining and processing equipment from steel 110G13L depending on the hardness of the destroyed rock.

Go to volume

Similar articles

Diagnosing of technical condition of turbocharger of diesels rolling stock
2014 A. A. Chernyakov
Acoustic emission diagnostics buildings mining companies in the North
2014 A. I. Potapov, I. V. Pavlov
Evaluation of possibility of diffusion welding of acoustic units
2014 S. A. Ermolin, A. S. Tarasov