Submit an Article
Become a reviewer
M. V. Dvoinikov (2018) Designing of well trajectory for efficient drilling by rotary controlled systems. Journal of Mining Institute. Vol 231. p. 254. DOI: 10.25515/pmi.2018.3.254
DvoinikovM. V. (2018). Designing of well trajectory for efficient drilling by rotary controlled systems. Journal of Mining Institute, 231, 254. https://doi.org/10.25515/pmi.2018.3.254

Designing of well trajectory for efficient drilling by rotary controlled systems

Authors:
M. V. Dvoinikov
  • Saint-Petersburg Mining University
Date submitted:
2017-07-19
Date published:
2018-06-25

Abstract

The main directions of increasing the efficiency of drilling wells by improving methods for designing profiles of directional and horizontal wells are identified. The feasibility and necessity of using at drilling with rotary controlled systems the trajectories of directed wells' profiles with continuous curving, that do not contain conjugated sections, on the basis of plane transcendental curves are theoretically substantiated and experimentally confirmed. An algorithm and software are developed that allow optimal selection of a profile or a trajectory section, taking into account minimization of twisting, bending, compressive and tensile stresses that ensure the efficiency of technical and technological parameters of well drilling.

Go to volume

Similar articles

Complex petrophysical correction in the adaptation of geological hydrodynamic models (on the example of Visean pool of Gondyrev oil field)
2018 V. A. Repina, V. I. Galkin, S. V. Galkin
Development of research of low-dimension metal-containing systems from P.P. Weymarn to our days
2018 I. V. Pleskunov, A. G. Syrkov
Analysis of the options of modernization of roller-bit drilling machines with a submersible steamer
2018 D. A. Yungmeister, I. Krupenskii, S. A. Lavrenko